Low Input RF Level ALC/MGC Switch Pre-distortion circuit CPU monitor control the working statues LCD shows the working status and the alarm message Cut off the optical power automatically when the work is abnormal Pre-settle the RS232 port for the monitoring status through remote computer.

Product Description OP-TA402R series amplifier mainly used in cable transmission system and it can offer high quality video transmission service.The equipment adopts surface mounting technolog...

Product Description OP-OR704 optical receiver is an outdoor 4 outputs waterproofing receiver. It is mainly used in the building, community or village with concentrated users and high level mul...

Product description OP-ORH20A WDM optical receiver is specifically designed for CATV HFC network with FTTH structure. Its main feature is low power consumption, AGC optical constant level output, s...

Product Description The equipment is designed to meet the requirements of the front-end computer room equipment intensive installation and development and design of the CATV integrated node. T...

Product Description The equipment is designed to meet the requirements of the front-end computer room equipment intensive installation and development and design of the CATV integrated node. T...

Product Description The external modulation laser transmitter product is a new type of high-performance 1550nm external modulation optical transmitter. Transmitter is the 1U height, and can be easi...

Chengdu SoChuang Electronics Co., Ltd. is a professional CATV equipment manufacturer and supplier. Up to now, our products have covered IP QAM Modulators, Encoders, Magnum Encoders, Encoder Modulat...

Applicable fiber SM (ITU-T G.652),  MM (ITU-T G.651),  DS (ITU-T G.653),  NZDS (ITU-T G.655) Cladding diameter 80 -150μm Coati...

1, OFDM modulation technology, anti- interfere 2, Link loss : the maxium 90dB, transmitting distance :700m 3, Support VLAN and QoS

Our company is engaged in professional CATV equipments, such as catv amplifier , optical receiver, optical transmitter, modulator.

CATV 2 way low Power optical receiver with E-O pin diode and NEC/PHILIPS amplifier module, 2 output ports, 45/87-862MHz, imperial F female port, FC/APC or SC/APC connector, rated output level 110dBuV

Flyin Optronics polarization insensitive optical circulator utilizes proprietary designs and metal bonding micro optics packaging. It provides low insertion loss, broad band high isolation, low PDL

1310nm with SNMP management, indoor, 1310nm AOI DFB laser, 1 output port, 24mW output optical power, MGC/AGC, imperial F type female port, FC/APC or SC/APC connector, RJ45 and RS232 port. 8~26mW

Flyin optronics' Micro-Optics WDM utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging. It provides low insertion loss, high channel isolation

Flyin Optronics' MMWDM utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging. It provides low insertion loss, high channel isolation,

Flyins Coarse Wavelength Division Multiplexers ( Multi Mode CWDM) demonstrate low loss and reliable performance. These devices show broad passbands and high isolation

Flyin Optronics offers CWDM Mux-Demux and Optical Add Drop Multiplexer (OADM) units to suit all kinds applications and network solutions. Some most common ones are: Gigabit & 10G Ethernet, SDH/SONET,

Flyin optronics 100GHz/200GHz 1x2 wavelength multiplexer utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging to achieve optical add or drop

Flyin Optronics 100GHz dense wavelength division multiplexer (DWDM) utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging

Detailed Product Description Professional Radio & TV Broadcasting Equipment 1.Perfect Solution: DVB-C DVB-S DVB-T system 2.Including IRD, Encoder, Mux ... Professional Radio & TV Broad

Applicable to CATV equipments that have 60V power supply and Two channels signal such as light receiver and amplifier.206S is for overcurrent<5A when 206Y is for overcurrent<10A.

Applicable to equipments of 220V, video and 485control such as CATV camera gun, sphere camera gun and 485master control etc.

Applicable to equipments of 12V (24V)and video(NET) such as camera gun, Single video and lght receive-dispatch etc.

1. IPTV EOC Master(INTELLON 6400) with CE, FCC, ROHS, Homeplug, IEEEP1901 2. Factory price 3.One master can carry 64 end users

1. Optic equipment CATV 300mpbs EOC master with factory price 2. User can surf on the internet and watch TV at the same time.

YDN-TS2014 SD IRD could receive RF signal from DVB-C LNB input (TS stream met MPEG2 regulations), and Decode for A/V signal output. surveillance, replace DTV STB, save space greatly.

YDN-M2208 is a TS stream re-multiplexer of DVB system.And could seting and operating by the front panel LCD display offline.

YDN-CA101 is a standard-alone scrambler, with DVB simulcrypt scrambling for input code stream, built-in control generator, could send fixed or variable control word scrambling.

IP-QAM Modulator YDN-QA102 is the professional broadcast grade device dedicated to three-network convergence platform in the high speed IP-based head-end series.

YDN-IRD2201S SD IRD could receive RF signal from DVB-S LNB input (TS stream met MPEG2 regulations), and Decode for A/V signal output.

YDN-A101 is one of the main equipment of cable digital TV headend, receiving signals from the DS3/E3 network signal, transform into ASI transport stream, and it can package TS stream into the DS3 net

2 WAY Satellite splitter, 5-2400MHz, Zinc die-cast housing with nickel plated, Low insertion loss, high isolation 1.Zinc die-cast housing with nickel plated 2.British system F-type connector 3.Low insertion loss, high isolation *****. passing current 0.5A, DC 24V *****-outputs 6.Bandwidth:5-2400MHz

Chengdu Huikai technology Co., LTD was founded in ***** was located in Chengdu high-tech zone in China and mainly engaged in the development of digital TV products, manufacturing and sales. Huikai's product has the core technology with independent intellectual property rights. Its products are fully compatible with DVB standard. Its headend series include digital satellite receiver, encoder，multiplexer, scrambler, modulator, etc; terminal series include DVB -C STB, DVB-S STB, DVB -T STB. It provides digital TV system solutions for different market demands, and produces OEM services for customer’s special requirement. Huikai serves for customer with good faith. By the modern enterprise management concept, advanced production technology and perfect quality assurance system, it can provide customers with satisfied products and services. Hoping your coming.

QAM Modulator is the main equipment CATV digital head-end, receiving DVB transport streams which come from coder, multiplexer, DVB gateway, scrambler, video server etc. It does signal processing like RS coding, convolution interleaving and QAM modulating, providing IF/RF output. Features ●Complying DVB standard signal channel coding. ●Support full range variable data rate, bandwidth and QAM mode Data stuffing ●Super buffer (optional)，anti-burst code stream ●PID filter, re-reflection, PSI、SI information synchronal updating possible. ●Automatically code stream stuffing and empty pocket deleting. ●Code stream real-time monitoring, empty pocket filtering ●Support NIT table modifying ●Real-time code stream monitoring ●PCR adjusting, output symbol rate variable:1-7Ms/s； ●Fixed or agile channel output; ●Providing ASI and Ds3 input port and output port (optional) ●Providing RF output monitoring port（-20dB）； ●Support Local or Remote administration ●LCD display, flexible in op...

Features ●Complying DVB-T, ETSI/ EN50083 ●Two TS ASI inputs in hierarchical mode or redundant mode ●Support OFDM with: 2K, 4K, 8K ●Support modulation with: QPSK, 16QAM, 64QAM ●FEC:1/2, 2/3, 3/4, 5/6, 7/8 ●Guard interval: 1/4, 1/8, 1/16, 1/32 ●Support Hierarchy modulation: 16QAM, 64QAM, Alfa1.2.4 ●Support SFN and MFN with MIP Processing ●Channel Bandwidth: 6MHz, 7MHz, 8MHz ●Option IF agile from 10 MHz to 50 MHz with step 1KHz ●RF agile from 110 MHz to 860 MHz ●External 1 pp s and 10 MHz Clock inputs ●2ASI inputs, support ASI loop out ●PID filtering and re-mapping ●Linear and non linear correction ●Front panel control and IP remote control ●PSI/SI information pick-up, phase and modification ●RJ-45 Ethernet interface introduces remote maintenance, supervision and software upgrade. Specification: ●Fully complaint with EN 50083 ASI interface standard ●Support 188/204 packet, Packet mode and Burst mode ●TS Redundancy: Manuel/Auto, Seamless in S...

Outline QPSK digital TV modulator adopts advanced digital signal processing technology, of which receiving port can directly use digital satellite receiver for receiving, thus fully complying DVB-S standard. Not only can it gain relatively high frequency spectrum usage ratio, having very strong anti-interference and relatively high price performance ratio, but also it could be applied with analogue FM microwave equipment. QPSK digital TV modulator adopts various processing method, such as random energy spread processing, RS coding, convolution interweave, contracting convolution coding, and pre-modulating base band shaping processing, etc. all these contribute a high guarantee to the data transmitting performance. In a word, it’s a high performance QPSK modulator for transmitting digital TV and other digital signal. Features ●Complying DVB-SETS300-421 QPSK modulating standard ●IF output frequency range 450MHZ~950MHZor950MHz~2150MHz ●Build-in frequency synthesizer, support up...

1) RF: the RF input signal through the optical transmitter on the rear panel of the "RF / IN" connector input. Input signal is amplified to meet the needs of the driver laser level. 2) 2) Laser control circuit: This circuit is used to control the laser temperature, bias current and the signals, to obtain a stable optical power output. 3) Pre-distortion correction circuit: to facilitate long-distance transmission. 4) Network management circuit: optical transmitter microprocessor also provides communication interface, set the rear panel RS -232 485 computer industry standard interfaces and Internet port for network management and remote monitoring use. CATV addressable charge management system Nonlinear Editing System 5) Meet GY/T143-2000 "cable television system of laser transmitter and receiver AM network technical conditions and methods of measurement" standard category A requirements of laser transmitter;

Feature: 1. Satellite finder of king around the world 2. NIT function 3. Constellation diagram function 4. Display:3.5 inch high quality TFT LCD TV 5. Audio output:Built in speaker with volume control 6. New FAST Spectrum Analyzer 7. DiseqC switch 8 ways 8. Motor control diseqc 1.0/1.2/usals 9. Unicable standard-1.2.3.4 SCR0, 1, 2, 3 10. All LNB types supported 11. Very sensitive new tuner 12. Calibrated meter to industry standards 13. Test:CBER, VBER, C/N Signal quality and strength 14. Pre-store the channel list from all over the world Technical data: ***** range: 950MHz~2150MHz 2.Signal level range: -65dBm~-25dBm 3.Symbol rate:2Msps~45Msps ***** input connector: F type ***** resistance: 75ohm 6.22KHz Signal: 22KHz?2KHz 7.Support DiseqC ***** of measurement :QPSK signal level, Bit error rate, carrier rate 9.Storage: 40 value of measurement, 80 configuration data, 10 spectrum data 10.Support Constellation diagram ***** of satellite finding: sound an...

Features: 1. View all free to air DVB-T channels directly on the TV screen. 2. New high resolution 3.5 inch LCD display 3. Professional spectrum screen with fast reaction times.Bandwidth select-able, with channel test function 4. For terrestrial digital and analogue installation 5. Accurately analyse and measure C/N、MER and BER 6. Fast auto scan function screen. 7. Scans the full plan selected 8. Multi channel plan selection from memory. Edit by hand or PC. 9. With COFDM demodulation Specifications: A: COFDM Demodulated Frequency range: form 46MHz~870MHz Level range: 35dBμV-110dBμV Level measurement accuracy: 2dB Measurement resolution: 0.1dB MER: 19~32dB BER: 1.0E-2 to 1.0E-8 C/N：shown and linked to Pass, Margin, Fail Indicator:Signal Level Punctured codes: 1/2, 2/3, 3/4, 5/6, 7/8 Demodulation: QPSK, 16QAM, 64QAM B: Analogue television channels Measurement Frequency range: 46MHz～870MHz Level range: 25dBμV-120dBμV ...

products description: ***** differentiation to meet the different requirments, for our customers do more choise. 2. Adopting low noise DFB as as signal source, adoping LiNb03 as sigual modulate. 3. Adopting predistortion circuit. technoques, reaching the top of CRN, still have a prefect performance in CTB and CSO. 4. Adjustable SBS (13dBm, 16dBm, 18dBm), to meet the different requirments for net. 5.Automatic AGC control, although input differences RF, then can have stable signal for this to output. 6. Built-in duplicate power, and automatic transition. 7. Whole-automatic temperature control by Chassis . 8.show warning to you byVDF, which warning parameters depature and so on. 9. Provide RS-232 standard interface, you can make a choise for showing information also for management & monitor. 10. Provide RJ-45 standard interface, suport SNMP, used for computer remote managerment and AGC/SBS/OMI parameter adjust...

SC-2101 multiplexer is a digital broadcasting TV system TS stream re-multiplexer. SC-2101 multiplexer compress, encode and multiplex on front-end to gain a number of single program or multi-program transport stream according to user needs, and to synthesize one channel transport stream, and can be inserted in the output stream EPG (Electronic Program Guide) , CA (Conditional Access), as well as data broadcasting etc. It can support at most 8 channel input bit stream to reuse, supports serial ASI interface, input code stream bit rate is 270Mbps (highest) , four output channels, output bit rate can reach 160Mbps. By equipment auxiliary data input channel, SI Table data generated on external SI (Service Information) server can be inserted with output bit stream in real time to achieve the EPG and data broadcasting value-added services. Its volume is IU computer case. It can completely off-line set and run by the front panel LCD display. Features: . Compliance with ISO13818 and EN300...

SC-2103 seven in one satellite receiver, is one of the main equipment of cable digital front end, to receive signals from satellites’ 6 channel signal and 1 channel ASI signals to multiplexer, and output one channel ASI interface TS stream. Features: .Comply with DVB standarded channel coding; .Inside multiplexer . PCR Jitter <= 37ns; .Local and remote management by webmaster; . LCD display in Chinese and English, easy and flexible to operate; . High reliability design, stable operation;

MMDS/MUDS/DVB-T/DVB-C/DVB-S, CATV Headend Equipment Main Product: Encoder Series: Single encoders, four in one encoders, five in one encoders, IP encoders Multiplexer series: single-output multiplexer, dual-output multiplexer Scrambler Series: Standard alone scrambler Modulator Series: QAM modulator, QPSK modulator, DTMB-T GB Modulator Receiver Series: 4-channel satellite receiver, 7-in-1 satellite receiver, direct broadcasting satellite television receiver Bit stream recording/playing analysis: USB TS player, USB TS Analyzer, PCI interface TS playback cards, PCI interface TS capture cards, PCI interface capture and play integrated card Other: ASI TS Splitter, DS3-ASI Adapter, ASI-IP Gateway.

We are professional supplier of CATV network system in China, We offer CATV Equipment including:CATV Optical Transmitter, CATV Optical Receiver, CATV Amplifier, EDFA, CATV Splitter, CATV Taps, CATV Connector, Coaxial Cable, HDMI Cable, Catv tools so on The Product Description CATV 2 way splitter/tap Outdoor CATV sub-trunk 2-way tap, 11, 14, 17, 20, 23, 26, 29dB, RFI>110dB, in-out power pass 10A, tap ports DC blocked, in&out UNEF 5/8" port, without connectors, F female tap port. Features 1. Low insertion loss 2. High return loss and isolation 3. All tap port has blocking capacitor 4. Uninterrupted switch is available according to client requirement 5.2-way, 3-way, 4-way, 5-way, 8-way tap etc please visit our website: 3w (dot)adkoptic(dot)com to get more and detail information. or email to me: adkoptic(at)adkoptic(dot)com

■ WT-8600、WT-7500Series 1310nm laser transmitter is the important equipment for building CATV HFC network, which is mainly used in long- distance optical fiber transmission for TV image signal, TV digital signal, telephone TV signals and data signals(compressed date)。 ■ WT-8600、WT-7500Series 1310nm laser transmitter adopt international famous brand low-noise DFB laser, high performance LiNbO3 external modulator, and RF drive part is with RF power digital auto-operation technology and advance RF pre-distortion circuit developed by our company. On the other hand, it builds in perfect micro-computer auto-monitor system to make sure good performance index of the whole equipment. ■ Since the first 1310nm laser transmitter come into market successfully, the production technology innovates constantly, circuit structure changes a lot and quality index improves much. On the other hand, RF part of WT-8600, WT-7500 Series 1310nm laser transmitter adopt GaAs amplify circuit , all performance ...

In order to reach high index and dependability, main instruments are all adopted imported famous brand to cooperate microprocessor automatic control circuit and high dependability switch power to assemble up. High dependability, low noise, especially double pump design makes noise index better. Each main technique performance index and technique plane can compare with foreign similar machine. And with high performance to price ratio, it is suitable for using at large or middle-size network.

WR8602JL is our new high-class 2-way output CATV optical receiver. The pre-amplifier adopts GaAs MMIC meanwhile post-amplifier adopts GaAs module, the optimization circuit design and with 10 years design experience that match to high performance index. The microprocessor control working status meanwhile LED digital display parameter that makes more convenience operation and becoming main products in CATV network.

main features: -heavy zinc die-cast housing with corrosion protection -5-1000Mhz BW-Microstrip designed for consistent perfomance -using high quality/premium rerrites, chip resistors&chip capacitors -surge protected circuitry and capacitively coupled ports -low intermodulation circuitry to ensure low distortion during interactive operation -all F ports are 3/8-32 female standard, 75 Ohms all ports

Features: 1) RF shielded zinc die cast housing with nickel-plated 2) All ports F-(f) connector 75 Ohm 3) Grounding terminal provided 4) Two pieces of screws attached 5) Low insertion loss, high return loss and isolation 6) Screening factor: 5-470MHz ≥ 75dB, 470-1000MHz ≥ 65Db CATV Splitters 3-way balance, w/ DC/HUM protection Digital-ready for 2-way communication systems SMT for superior stability and reliability Tin plated zinc alloy die cast housing Nickel plated brass lid for corrosion protection Solder back provides RFI shielding >130dB Extra blocking capacitor for DC/Hum protection Low inter-modulation >105dB High isolation in the return path Compliant with SCTE standards 100% testing to electronical specification

AOR1000CG Out-door optical receiver is an economic optical receiver with high performance. It uses unique optical controlled AGC system, low-power optical receive and digital display various parameters. All GaAs module, high performance index, high output level, low distortion and low power loss. Doubled anti-lightning system and unique rage control circuit. AOR1000CG is a preferred choice of network reconstruction. Product description Characteristics:  Microprocessor controlled system which can collect and detect various parameters timely.  Optical controlled AGC system improves the stability of the equipment.  All parameters adjusted by keyboard, easy to operate, save for you precious time.  Voice and light alert, easy to find where the problem is.  Digital display all parameters.  Input optical power range -10～+2dBm.  RF attenuator of military level, more precise attenuation.  Unique GaAs module, high output level, low distortion and low power loss.  Doubled...

GRD84 series optical node is two-way optical node with four-port, pluggable fixed attenuator and equalizer, and with high level outputs of 860MHz. It remains separate power port and in each port, there is testing port for upstream input and downstream output with -20dB

APT is a Sino-Canadian joint venture specialized in passive fiber-optic components, such as patchords, connectors, pigtails, splitters, and adapters. Other components used in access networks, CATV, and communications, such as transimiter, amplifier, splice closure, etc. We are the biggest ISO9000 certified company with advanced equipments in the north of China. Optical fiber from Cornning .Ferrules are imported from Japan. The characters of the surface of polishing ferrules are accord with even exceed xxxxx-quality and pretty good after-sale service will be guaranteed. Welcome to enquiry us and visit our company to cooperate. Look forward to your reply soon sincerely. Thanks! Contact: Betty/China P:86-532-***60 ***72/4-3652 E-mail: xxxxx Skype: jinbetty96 Website: xxxxx

JXDH-6302 QAM Modulator Outline: JXDH-6302 QAM Modulator, is the main equipment CATV digital head-end, receiving DVB transport streams which come from coder, multiplexer, DVB gateway, scrambler, video server etc. It does signal processing like RS coding, convolution interleaving and QAM modulating, providing IF/RF xxxxx DVB standard signal channel coding. JXDH-6502(A) QPSK Modulator Outline QPSK digital TV modulator adopts advanced digital signal processing technology, of which receiving port can directly use digital satellite receiver for receiving, thus fully complying DVB-S standard. Not only can it gain relatively high frequency spectrum usage ratio, having very strong anti-interference and relatively high price performance ratio, but also it can well comply analogue FM microwave equipment. QPSK digital TV modulator adopts various processing method, such as random energy spread processing, RS coding, convolution interweave, contracting convolution coding, and p...

The serial amplifiers are used on 500MHZ, 750MHZ CATV network system to compensate the loss of signal caused by the cable, and also the two-way amplifier after the photic node, trunk and branch signal amplifier. There are totally below kinds SDSF two-way trunk amplifier SDGF1, SDGF2, SDGF3 standard trunk amplifier, bridge-connecting trunk amplifier, splitter trunk amplifier SDZF branch amplifier, users splitter amplifier Character: 1: Using imported high-quality amplificatory module, high output MER, little distortion, low noise, with high CTB, CSO and excellent frequency response. 2: It has bridge-connecting output function to make the design for the system more convenient. 3: Using new casting aluminum shell that has good heat dissipation, magnetism shield and waterproof function. 4: Using 60V or 220V power. 5: This system used switch or linearity voltage regulator. 6: With adjustable equalizer inside, adjustable attenuator and VHF revised circuit. ...

MIC-OA series 1550nm erbium-doped fiber amplifier adopts low-noise pumping laserhigh-quality erbium-doped fiber and advanced microcomputer real-time monitoring circuits to ensure excellent performance. It is mainly used in large or medium sized HFC optical fiber transmission network. Features 1. Adopts the latest 980nm1480nm double-pumping laser technology for higher output optical power. 2. Incorperates pumping laser and high-quality erbium-doped fiber to insure low noise, high efficiency of energy conversion. 3. Perfect microprocessor automatic monitoring circuitry can monitor the operating status real-timely and precisely 4. Front panel displays status and alarm. 5. With standard RS-45/RS-232 interface, remote monitor conveniently. 6. 19"1U case.

MIC-T/S series high isolation tap and splitter, which adopts the tinned die-cast zinc-alloy case and tin sealed technology for the high performance of anti-causticity, anti-RF interference, anti-leakage. Features 1. Frequency range is 5 1000MHz. 2. Excellent magnetic core. 3. Low loss, high isolation and return loss. 4. Shielding factor is up to 100dB.

MIC-OT-860 series indoor 1310nm optical transmitter is mainly used in large or medium sized HFC optical fiber transmission network. Features 1. High performance DFB laser. 2. Excellent predistortion circuit to improve C/CTB and C/CSO 3. AGC RF control circuit can ensure the constancy of lasers modulation depth. 4. ATC and APC can ensure the best operating status of laser. 5. Slow start-up circuit and RF over-protection circuit ensure the laser will not be damaged. 6. Perfect microprocessor automatic monitoring circuitry can monitor the operating status real-timely and precisely 7. Front panel display status and alarm. 8. With RJ-45 and RJ-232 interface, remote control conveniently. 9. 19"1U case

MIC-OT-1550 series 1550nm externally modulated optical transmitter adopts low-noise 1550nm DFB laser, advanced pre-distortion technology and perfect microprocessor automatic real-time monitoring circuitry to ensure high performance. It is widely used in large or medium sized HFC optical fiber transmission network. Features: 1. Adopts SBS/SPM to insure excellent C/CTB, C/CSO. 2. AGC/MGC 3. Incorporates multi-frequency RF pre-distortion circuitry to improve C/N , CTB and CSO 4. Built-in perfect microprocessor automatic monitoring circuitry can monitor the operating status real-timely and precisely 5. Front panel displays each parameter exactly. 6. With standard RS-485/RS-232 communication interface, remote monitor conveniently. 7. 19"1U case

Specifications: 1) Working wavelength: 1,540~1,560nm 2) Input power: 0~+10dBm 3) Output power: +13~+27dBm 4) Noise figure: ≤5.5dBm 5) System index: CNR≥51.5dB, CTB≥-65dB, CSO≤-65dB 6) Test conditions: a) 59route PAL-D, 65km optic, 0dBm receiving b) ≥5dBm input EDFA (back to back, CNR ≥53dB)

http://xxxxx/ CATV China,CATV Equipment,CATV Transmission Equipment,CATV Amplifier,CATV Distribution Equipment,China CATV Manufacturer,CATV Equipment Supplier,Optical Transmission Platform,Cable Transmission Equipment,CATV connector,FM Transmission Equipment,FM Modulator,Outdoor Optical Node - ZHEJIANG CHUANGYI GROUP. CHUANGYI group is one of the largest and fastest growing CATV suppliers which specialize in the production, R&D and sales of CATV transmission and digital television equipment in China. CATV China,CATV Equipment,CATV Amplifier,CATV Transmission Equipment,CATV Distribution Equipment,Optical Transmission Platform,Cable Transmission Equipment,CATV connector,FM Transmission Equipment,CATV Amplifier,FM Modulator,Outdoor Optical xxxxx group is one of the largest and fastest growing CATV suppliers which specialize in the production, R&D and sales of CATV transmission and digital television equipment in China. Zhejiang Chuangyi Group HQ Add: Room403,Huahong Mans...

http://xxxxx/ CATV China,CATV Equipment,CATV Transmission Equipment,CATV Amplifier,CATV Distribution Equipment,China CATV Manufacturer,CATV Equipment Supplier,Optical Transmission Platform,Cable Transmission Equipment,CATV connector,FM Transmission Equipment,FM Modulator,Outdoor Optical Node - ZHEJIANG CHUANGYI GROUP. CHUANGYI group is one of the largest and fastest growing CATV suppliers which specialize in the production, R&D and sales of CATV transmission and digital television equipment in China. CATV China,CATV Equipment,CATV Amplifier,CATV Transmission Equipment,CATV Distribution Equipment,Optical Transmission Platform,Cable Transmission Equipment,CATV connector,FM Transmission Equipment,CATV Amplifier,FM Modulator,Outdoor Optical xxxxx group is one of the largest and fastest growing CATV suppliers which specialize in the production, R&D and sales of CATV transmission and digital television equipment in China. Zhejiang Chuangyi Group HQ Add: Room403,Huahong Mans...

Headend system 860MHz Standard Adjacent Channel Modulator Professional Agile Adjacent Modulator 750MHz Broadcast-Grade Adjacent Modulator CATV Agile Demodulator CATV Headend Combiner Digital Cable TV QPSK/QAM Agile Transmodulator Digital Satellite IRD for CATV with Common Interface Digital DVB TS Remultiplexer Digital QAM Agile Transmodulator Assignment network

Optical ethernet and CATV equipment 10/100Mb Single / Dual Fiber Media Converter 10/100/1000Mb Single / Dual Fiber Media Converter 2U Rack Mount Media Converter 10/100Mb 2U SNMP Rack Mount Media Converter 10/100Mb 2.5U Rack Mount Media Converter 10/100/1000Mb OT1550 External Modulation Optical Transmitter 1550nm EDFA 1550 CATV Erbium-Doped Fiber Amplifier OT8600 Series 1310nm Laser Transmitter OR2004R 4-output Return Optical Receiver XKSTONG8130 Optical Receiver XKSTONG8230 Optical Receiver XKSTONG8330 Optical Receiver

Transmitting the immage ,language ,digital information for CATV or communications by fiber Advanced pre-distortion circuit, eusures the CTB and CSO target best Possesses MGC/AGC function  ATC and APC ensure the best operating capability of the lasers  19�1U high standard rack, and standard network monitoring interface RS-485 or RS-232, carry out the long-distance network monitoring

Chengdu HUA-SU Electronic Technology Development Co., Ltd. is a professional in CATV equipment research and development, production, marketing, engineering design for the integration of high-tech enterprises installation. Companies in high-tech zones set up in 1988 in Chengdu, 2001 renamed Chengdu Yi Electronic Technology Development Company. Companies with integrity and solid work, from weak to strong, high-tech zone of Chengdu now has more than 3,000 square metres of production bases, office buildings over 1,000 square metres, with more than 2,000 yuan of fixed assets. CATV equipment company committed to the operation, rely on Wu "unity, and hard work, pragmatism, innovation," the spirit of adhering to the "integrity-based, technology-led" business ideas, and improving the management of an outstanding team; Rallied the group to forge ahead, and technology strong, experienced, senior technicians adept at innovation; to develop a number of technical knowledge, good management of the...

CYR2000C Administration Proxy-hosting 1. Introduction: CYR2000C administration proxy-hosting is a kind of SNMP proxy equipment that can bring Non-SNMP equipments into SNMP system, and administer Non-SNMP equipments by SNMP software at the administration end. It adopts standard SNMP protocol (v1/v2) to monitor and administer equipments of our company�s, CYR2000C operates with user-defined MIB library, establishes the one-to-one map corresponding relationship between index of administered equipments and serial number of administered equipments 2. Features: A.Standard（rack mounted）case: 19�� , 1U B.Supporting the standard SNMP protocol and compatibility with the SNMP software of famous manufacturers. C.Providing with command line and web control pattern to operate easily. D.Supporting long-distance download. E.Complying with SCTE-HMS. F.Two RS485 ports, one RS232 port for Ethernet. G.Administering more than 250 equipments by one proxy -hosting. H.High performa...