Water-proof design with IP-65 Protection level. Integrated with splice cassette and cable management rods. Manage fibers in a reasonable fiber radius condition. Easy to maintain and extend the capa...

External Modulation Optical Transmitter EM1550-xx,   1550nm, 47~862MHz, SBS, 13/16/18dBm or adjustable, 2 output ports with ≥7mW output optical power,   imperial F type female p...

Features: The box add aging-resistant in imported high tensile construction plastic out-faster is made up of stainless steel. Overlap structure in splicing tray easy to install Suitable for ordinar...

The fiber closures are capable of protecting fiber cable splices in straight-through and branching applications

1. High quality PC, ABS, PPR material optional 2. Used in straight-through and branch application for cables of bundle fiber and ribbon fiber 3. Trays can be increased or reduced according to the a

Product Feature RSBJ jointing closures are fiber reinforced jointing closures and widely used in non-pressurized telephone network for the protection of cable joints RSBA is widely used in pressurized telephone network for the protection of cable joints and is the most advanced pressurized closure system available.

Fiber Optic Splice Closure 1. 4 fiber cable in-out round ports, available for duct, aerial, direct buried. 2. Engineering mechanical plastic filled with sealing material, stainless steel fastening pieces 3. It can be opened after sealing Dimension: 435x190x120mm Weight: 2.6KG Cable diameter: Φ10-22 mm Cable entry ports: two cable entry port on each end Max capacity of fiber splice: 24 single Max capacity of splice tray: 8 Max capacity: 192 single Sealing structure: sticky cincture Packing: Inner carton dimension: 496x196x138mm weight:2.6kg Outside carton dimension: 515x425x575 weight:22.4kg No. of units per carton: 8 pcs

Product Feature: Cable fixed before it enters closure to ensure that the sealing property would not be affected by cable flexion, torsion and axial tension. Special design for the bolts of the closure housing makes it easy to open or shut the closure. Imported engineering plastic is adopted as raw material and modified by Fiber-Mint’s compound formulation.

1. Environmental protective material; compliant with RoHS. 2. The material for the closure is developed by famous suppliers from abroad, excellent performance and could meet all requirements in IEC1073.1 after test. 3. As the material for sealing gasket and closure are unique, our closures could be used repeatedly and low consumption to environment and resource. 4. The fixing device for reinforced core is of high resistant to high voltage and could stand up to 15KV. 5. Non-losable bolts are used to seal the closure so that they won't fall off during field installation. 6. Unique grounding device to ensure the sealing performance, and at the same time easy and convenient for installation. 7. The splice holder could be used for both ribbon and single core fibers. 8. The "vulcanized rubber" sealing device and sealing gasket developed for dome type of FOSC has obtained patent. □ TECHNICAL INDEXES Environmental temperature：-40℃～+55℃ Optical performance： no obvious add...

Closure provides perfect solution for the protection of the junction point of optical fiber cable from environment. Silicone gasket is used to seal closure and provide a long term reliability. Closures have two or three cable entrance ports on each end. Closures can be installed at temperatures between -40℉~176℉ (-40℃~80℃) Closures are compact and lightweight. Its installation is very easy due to applied minimum bolts.

Purpose: aerial, direct-burying, wall-mounting, Pipeline laying way Structure: open structure / Split Type (quick installation type) Material: ABS/PC Components: Seal tape, Insulation tape, Nylon tie, optical cable heat shrinkable sleeve, mental hook, seal fittings, numeral bar, retaining ring Environmental temperature: -40.C to +65.C Atmospheric pressure: 70.106KPa Optic property: The spare fiber coiled in the fiber emplacing device; the fiber connector won''t attenuate during the FOSC installation operation period. Seal Performance: After the closures are sealed, then pressurized up to 100KPa�5KPa in water, immersed in 15 minutes, there are no air bubbles. Re-encapsulation Performance: The closures are pressurized up to 100KPa�5KPa in water, immersed in 15 minutes, there are no air bubbles. Voltage-resistance strength: Under the effect of 15kv/DC/1min, non-puncture, and no arc-over. Insulation resistance: .2X104MΩ Maximum capacity: 144co...

Innovative design fiber optic closure is an arc and horiztontal type with one hinge in one side and open in another side. Two pieces of insert plates and fixing bolts are used to fix and seal FOSC. The FOSC is suitable for protecting fiber cable splices in straight-through and branching applications. It can be placed in underground, aerial, wall-mounting, handhole-mounting and duct-mounting applications. Based on an advanced formula, the plastic parts are made of injection-molded, high-strength engineering plastic PC by numerical control equipment, therefore effectively prevent products from aging caused by coldness, heat, oxygen and ultraviolet radiation. The strong housing and main components provide fire resistant, waterproof, and quakeproof while protecting splice closure during pulling, torsioning and impacting. Entirety: GTJA 203 provide with 6 fiber cable in-out round ports and the cable diameter is from Ф7-Ф25. It can be used in wall-mounting, underground, ...

Branch-off clip(Large, Medium, Small)Heat shrinkable closure kitFiber optic splice closure kit Branch-off clip(Large, Medium, Small) Heat shrinkable closure kit