RF Controller GPRS, GSM

RF Transceiver GSM Relay

Powerful and lost cost device; Two alarm input channels for gate safety ; Very safety with your authorized telephone number to open the gate; Up to 2000 phone numbers to control ;

1.Support 10 master phone numbers to control. 2.Brand new and high quality. 3.You can control the GSM switch through&...

The WT-9003 is a simple system to allow remote control and also monitoring of isolated or unmanned sites and saves on any of attendance costs incurred for false alarms on systems. Let your Mobile P...

Remote Controller S130 work as a wireless remote switch by GSM network.Also called GSM SMS remote controller in industry area. 1.Wireless remote controller work by GSM Quad-band Network

GPRS DTU is an ideal solution for factory automation, environmental monitoring and remote device management for M2M industry.

1, GSM 850/900/1800/1900 MHz automatically acclimatized 2, Power supply: DC 5.0V power adapter 3, Lithium-ion battery: 3.7V 1000mAh 4, Recharge limited voltage: 4.2V

1- wireless remote control garage door opener remote 2- ASK 3- Rolling code technology 4- Various frequency upon request

The GSM remote control switch is compose of network model and intelligent control model.It main through GSM Cell phone message control switch signal to execute normally close, interlocking.

ESIM051 is perfectly suitable for any automation, industrial or private sector electrical system or device controlling. It has 5 inputs and 1 relay output which can be controlled via SMS or free of charge phone call. In case of emergency ESIM051 will inform user by SMS or phone call. Also it may be used as a GSM backup system for any intruder or security alarm system. Configuration of device can be done by USB cable or SMS! eldes.lt/images/failai/esim051_flyer_en.pdf best regards, Arunas arunas(at)eldes.lt +***22751

GSM Gate Opener RTU5015 open the door for you at 0 Charge, the details as belowings: Model: RTU 5015 (1Output 2 Inputs) Name: GSM Gate Opener GSM Gate, Barrier, Shutter, Garage Door and Door opener Open gate or garage door with a FREE call from your mobile phone! Remote switching machines with a FREE call from your mobile phone! The GSM Gate Opener RTU5015 is a very simple device which can be used for authorized door access, controlling gates, switching of remote equipments, car parking systems. Actually the GSM Gate Opener RTU5015 can be used in places which require to turn ON/OFF your system, machines, equipments remotely with a FREE call from your mobile phone. Just dial from Authorized User number then the Barrier and doors are opened, or the machine are turn on or off by the GSM Gate Opener. There are no call costs, the GSM Gate Opener rejects the call from authorized number then carrys out the turn ON/OFF action. What Applications does the GSM Gate Open...

APPLICATIONS: Computer reset , Power on , Power off Pump control Alarm system Electronic lock control Industry equipment remote control Work station control ------------------------------------------------------------- Remote via telephone or cell phone Two relay output Two sensor input Supply voltage: 9V DC/300ma Voice Message Feedback for System Setting Voice Record as User's Language Voice Alarm Call> Automatic pick-up can be selected for 1-7 rings Automatic hang-up if no code is entered within 60 seconds -------------------------------------------------------------------------------- Item No. SPD-M01 Name: Multifunctional Telephone Remote Controller It is possible to connect a wide variety of devices to the relays for example security lights, heating and pump controllers, computers, etc. This remote control/alarm module functions at 1m as well as at 5000 kilometers or anywhere on earth! Commands can be sent to it, and an alarm can be receive...

Introduction SCOM-100 is a low cost, DIN rail mounted controller unit for alarm annunciation and remote control using SMS. The main unit incorporates a Quad Band (850/900/1800/1900MHz) GSM modem, 2 analog inputs, 4 digital inputs, 4 power relay outputs and a serial RS-232 port. Front panel LED indicators monitor control and digital I/O states. A variety of I/O expansion units (digital and analog I/O) can be cascaded on the serial I/O expansion bus to meet the application requirements. Simple setup and operation All setup and control is done using your mobile phone. Simply insert a SIM card with your name and phone number in the phone list and press the start up button during power up! Simple ASCII configuration commands are used for unit setup and control. Several commands can be packed in one SMS. The RS-232 interface can be used to alternatively setup and test the unit using a PC or an ASCII terminal. The rich command set features commands for configuring input alarm param...