Overview: CL-C3100 gives the interface conversion between G.703 E1 and V.35. This device provides an economical digital access solution for E1 and Fractional E1 network services. With a adapter cable, the Device can link to other DTE Device, such as router, at data rates of 64Kbps to 2048Kbps. User data is placed into the E1 frame, using only the required number of timeslots. Timeslot assignment is accomplished according to the Data Port speed and manual setting of DIP switches. It is widely used in communication network, both in WAN and LAN connection field. Feature: 1. Developed from the integrated circuit with our own property right. 2. E1 interface supports two kinds impedance of 120Ω balanced and 75Ωunbalanced 3. Offer three timepieces: master, outside, slave 4. Offer two loop functions: loop back to local port, loop back to remote port 6. Complete pseudo-random code testing function makes installing and adjusting more easily. 5. Operate easily and all the setting...

ESMB 3.0 controller is used to read data from electricity meters or other devices and transfer it to remote data management center via cable line - RS485, RS232 or Ethernet.   ESMB 3.0 has the...

Low cost, ZERO complaint or Defect Product Standard Carton, 2Pcs Per Carton Exwork, Guangzhou, China Aggregating protocol converter, Inverse Converter, Point to multipoint interface converter,

E1 to V. 35 & Ethernet Protocol Interface Converter. Transparent/fractional E1, 10/100M Auto Negotiation, AC/DC, SNMP, EMC, 19’’ 4U 16 slots or 2U 6 slots chassis selectable. Point to multi-point

E1 to Etherent protocol converter 1. provide 1~2 10/100Base-T ports 2. support full duplex/ half duplex and auto-negotiation

Fieldbus Repeater 1.data rate up to 12M;35mm DIN rail mounting;redundancy power; 2.Absolute competitive price from the CN MFG.

E1 converter 1.E1 route way support inter BERT Function 2.E1 loop return test 3.Provide 1~210/100M Base_T, Full/half

FE1/Double ETH Interface Converter (also as FE1/Double ETH Bridge) is an Ethernet bridge of high performance, which accomplishes the converting between the 100M Ethernet port and the E1 port.

■ Compatible with RS-232 and RS-485 standards of EIA/TIA. ■ Automatic data transceiver without external volume control signal (RTS) and three-line (TXD, RXD and GND) communication. ■ Communication rate: 300BPS-115.2KBPS ■ A maximum connection of 128 pieces of RS-485 or RS-232 interface devices. ■ Communication distance: 5 KM (9, 600BPS) ■ Power indicator light and data traffic indicator light available for malfunction indication. ■ Working mode: Working modes: applicable for both asynchronous half duplex (RS- 485) and asynchronous full duplex (RS-422) without any jumper settings needed. ■ Photoelectric isolation (an isolation voltage as high as 2.5KVrms /500VDC isolation), dedicated DC/DC module, 1, 500W lightning strike and surge protection and +/-15KV ESD protection and grounding interference protection for each RS- 485/422 line. ■ Electric interface: connector from DB9 female to DB9 male and RJ-45 connector. ■ Transmission me...

■ Compatible with RS-232 and RS-485 standards of EIA/TIA. ■ Automatic data transceiver without external volume control signal (RTS). ■ Communication rate: 300BPS-115.2KBPS ■ A maximum connection of 32 pieces of RS-485 or RS-232 interface devices. ■ Communication distance: 1.2 KM (9, 600BPS) ■ Power indicator light and data traffic indicator light available for malfunction indication. ■ Working mode: Working modes: applicable for both asynchronous half duplex (RS- 485) and asynchronous full duplex (RS-422) without any jumper settings needed. ■ Photoelectric isolation (an isolation voltage as high as 2.5KVrms /500VDC isolation), 600W lightning strike and grounding interference protection for each RS-485/422 line. ■ Electric interface: connector from DB9 female to DB9 male. ■ Transmission media: twisted-pair cable or shielded cable. ■ Dimensions: 113mmX55mmX25mm. ■ Working environment: -25℃ to 70℃, relative humidity 5% to 95%. ■ Plug-and-play ...

N* E1 to Etherent Protocol / Interface Converter 1.BNC and RJ45 2.hyper terminal or SNMP 3.provide 1~2 10/100Base-T ports 4.good quality 5.CE, FCC certificate

Introduction: HC-04 is a RS-232 and TTL level bi-directional interface between the converter, applied to hair, to cAlose the three-wire RS232 interface output with TTL level conversion, single-chip, embedded systems, such as serial debugging. HC-04 electrical performance in strict compliance with the standard RS232 and TTL standards, applicable to all standard serial devices. Electric Larceny-house design, there is no need external power supply. Product characteristics: 1.Unique serial protection circuit can be electrically charged hot-swappable ***** protection ***** transmission, adaptive baud rate, no need to change the User Agreement ***** Design *****-duplex data communications The technical indicators: Power: Passive Baud rate: 0 ~ 115.2Kbps ESD protection voltage: 15KV Operating temperature: -25 ℃ ~ 70 ℃

Spacecom N�E1/10/100BaseT series are user-end accessing equipments developed and produced with Spacecoms self-developed special-purpose integrated circuits. They are used for Ethernet data that takes super-large special-purpose integrated circuits as the core to realize user data accessing via E1 transmission network, so that Ethernet data can be transmitted over multiple E1s, breaking the bandwidth restriction of single E1. They can easily leverage the rich existing E1resources in the public network to build broadband Ethernet data network rapidly. Spacecom N�E1/10/100BaseT series has no special requirements for E1 channel, and can automatically tolerate errors from E1 . Even if some E1 channels fail, only the equipments data throughput can be reduced, no interruption of the transmission of data. They can be flexibly configured and easily maintained, and at the same time can provide complete network management capabilities.