Structural characteristics    Pump body: Cast iron    Impeller: Brass    Front cover: Cast iron/Aluminium with brass insert    Mechanical seal...

JET-P series self-priming pumps are high efficient jet pumps with excellent suction even when there are air bubbles. The pump consists of a single impeller, centrifugal pump and a jet pipe with a n...

JET PUMP FOR JETSKI , JET BOAT .We supply jet pump set for jetski and jet boat .If you request more information please contact us .

Under the direction and boundful blessing of Lord shiva to intirduce the ourself

JET PUMP JET Series pump has an excellent suction performance , even when there are air bubbles. The pump consists of a single impeller , centrifugal pump and a nozzle with a jet pipe.

Jet series self-priming pumps are high efficient jet pumps with excellent suction even when there are air ***** pumps consists of a single cntrifugal impeller and a jet pipe with a nozzle.

STANDARD DATA Single phase 220v/50hz.Brass impeller, carbon steel motor shaft, with thermal protector ***** model and materal such as three phase, 110v/60hz, dual voltage, stainless shaft, etc, will be available upon request. Fluid temperature up 60 Maximum ambient temperature 40 MODEL POWER(w) POWER(HP) Max head(m) Max flow(L/M) Max suct(m) Inlet and outlet PCS/20FT JET60 0.37 0.5 33 40 8 1"x1" 1800 JET80 0.55 0.75 44 50 8 1"x1" 1500 JET100 0.75 1 48 60 8 1"x1" 1500 JET200 1.5 2 70 90 8 1’’x1’’ 850

Specification: Power:From 0.75kw-2.2kw Voltage:220V 50Hz Max head:From 30m to 55m Max Flow:From 3m3/h to 12m3/h Max Suct:From 0m to 12m R/MIN:2800

The JET series are injection type clean water pumps, which are composed of a centrifugal pump and a nozzle, have the advantages of beautiful design, self-priming in short time, reliable performance, high head and deep ***** are suitable for pumping clean water and non-aggressive ***** are particularly suitable for domestic applications such as supply water from well, pool etc, the automatic distribution of water by surge tanks and pressure switch, gardening, and pressure boosting etc. Pumps should be installed in a covered area, protected against the weather. Operating Limiations: Pump Body:cast iron Motor Housing:aluminum Shaft:45#steel/stainless steel Impeller:brass/plastic Motor:closed, externally ventilated Insulation Class:B/F Protection Class:IP44/IP54 Duty:continuously rated Mechanical Seal:ceramic steatite/metalized carbon

Installation Structure ***** 2.Bearing ***** Seal 4.Pump cover *****-ring ***** ***** plate ***** 9.Pump shaft 10.Pump casing Application: 1. Household boosting, garden sprinkler, car washing 2. Pure water equipment washing 3. Non-flammable or non-explosive clear water without abrasive or fibre and not aggressive to stainless steel Operation conditions: 1. Liquid temperature: +5℃-+60℃ 2. Max environmental temperature: +50℃ 3. Max pressure: 6 bar 4. Max suction head: 8 m Selection notice: 1. Request for the flow and pressure 2. There are plastic impeller and stainless steel impeller for ATS to select. 3. The mechanical seal configurations are selective for normal water, pure water or hot water type. 4. Applied regions voltage and frequency: single-phase: 220-240V/50Hz；220V-240V/60Hz；110-120V/60Hz is available; three-phase: 380-415V/50Hz；380-415V/60Hz is available. 5. Applied regions reques...

The self-priming jet pumps are suitable to pump clean water and non-aggressive chemical fluids, even with liquid mixed with gas. They are suitable for water lifting and distribution in domestic applications by small and medium sized tanks. The pumps are reliable, safe and simple to use. Standard data and equipment Pump body: Cast iron Motor support: Cast iron Impeller: Brass (noryl if required) Shaft with rotor: Superior steel Mechanical seal: Carbon/ceramic Power: 220v/50Hz Other model and material will be available upon request. Working conditions: Max. Temperature of fluid up to 40 Max. Pressure 8bar Max. Ambient temperature up to 40

The JET series are injection type clean water pumps, which are composed of a centrifugal pump and a nozzle, have the advantages of beautiful design, self-priming in short time, reliable performance, high head and deep suction. They are suitable for pumping clean water and non-aggressive liquid. They are particularly suitable for domestic applications such as supply water from well, pool etc, the automatic distribution of water by surge tanks and pressure switch, gardening, and pressure boosting etc.

Please log on to our company web:xxxxx and check more details of our products. Thank you very much. Thank you so much

jet electric water pump 1. easy operation and maintenance 2. extremely reliable 3. Spares free 4. One year warranty 5. CE, CQC, SGS, ISO