Specifications¼   Throat Diameter: 2 in (50mm) Mounting Type: Bolt-on Nominal Impedance: 8 Ohm Power Capacity: 80Watts RMS  Sensitivity(1W/1M): 110dB Frequency Range: 500Hz...

line array karaoke system, portable speaker houn tweeter

Amazing Titanium Diaphragm HF Driver from RCE. RCE audio offer you the NO1 speaker replacement for speaker system. What you saw here is just your demand!

Aluminium ribbon tweeter for loudspeaker driver strong Neodymium magnet 3 inch enforced sandwich diaphragm build-in impedance convertor Sensitivity 93dB/1m/2.83v Power handling 17W nominal, 40W max Frequency range 1, 400-40, 000Hz Nominal impedance 7 ohm DCR 0.02 ohm Ribbon dimension 8mmX60mmX0.015mm Effective ribbon area 480 square millimeter Ribbon weight 18 milligram Gap flux 0.6 Telsa average Gap height 3 millimeter recommend cut frequency 3.000Hz with 3-order Net.Weight 650 gram

professional sound system use high frequency tweeter driver 1, 4 inch throat, polyimide plastic diapragm material, 44.4mm aluminium ribbon voice-coil material, sensitivity 112dB, Strontium Ferrite Magnet

Using up-to-the-minute modeling technology, Shunda compression drivers deliver the optimum balance between performance, efficiency, weight and cost. We can supply three series that will cover most requirements. The NE series, SD series and V series are classified according to magnet geometry, materials and unit price. They are suitable for a wide range of applications, the specification details are as follows:

HK GOTO is a leading manufacturer of stereophile quality audio systems. Employing some of the worlds finest electro-acoustical technicians and craftsmen, the company established state-of-the art R+D facilities in Toronto, Canada in 1994 and was fueled by early successes with innovative driver designs. In 1997, merged with highly-regarded speaker manufacturer Swans Speaker Systems and opened corporate offices in Monterey Park, California. Respected audio designer Frank Hale, former president of Swans, continues to serve today as Chief Designer for HiVi Speaker Systems.

M3S Full-Frequency -A full frequency design -Advanced alloy (magnesium/aluminum) cone, coated with special damping material -Optimum recovery CONEX supporting system, having very good stiffness and dynamic stability, improving the sonic features of the speakers. -High power handling voice coil with Kapton? Former and heat-resistant CCAW voice coil wire -Finite Element Analysis for shielded magnetic system with long-throw linear excursion design -Hi-Vi Symmetric Motor Drive (SMD) technology makes the voice coil into a symmetrical driving magnetic field, thus acquiring symmetrical driving force, reducing the mutual modulation of voice coil inductance and back electromotive force, improving the controllability of the speakers, achieving low distortion degree. -Finite Element Analysis for flat and extremely rigid iron frame, prevents the parasitic structural resonances, improving the linear array of sound source -Using leading technology of Small/Thiele parameters -Suitable...

Rated Imp.: 6.0/4.0 Ohm Rated Power: 85 W Peak Power : 180 W Sensitivity: 105 dB Freg. Range: 3kHz~40kHz Weight: 1025 g

Rated Imp.: 6.0/4.0 Ohm Rated Power: 30 W Peak Power: 80 W Sensitivity:96 dB Freg. Range: 2.5kHz~40kHz Weight: 520 g

Rated Imp.: 4 Ohm Rated Power : 30 W Peak Power: 70 W Sensitivity: 93 dB Freg. Range: 2.5KHz~40KHz Weight: 1150 g

Rated Imp. : 4 Ohm Rated Power :30 W Peak Power : 70 W Sensitivity :93 dB Freg. Range :2.5KHz~40KHz Weight :1140 g

Rated Imp. :6 Ohm Rated Power :50 W Peak Power :110 W Sensitivity :96 dB Freg. Range: 3KHz~40KHz Weight : 1850 g

we can supply many kinds of speakers (trumpet) ,such as the mini speaker, the mylar speaker,the car speaker,the audio speaker,the woofer,the tweeter. we can also design and produce speaker by the specification,if you are manage a company which will purchase some speakers, why don't you contact us.You're assured to get high-quality speaker with competitive price and first-class service. contact me at msn: kinbes(at)xxxxx