1p pair LSA module

Product Description

Contacts on the front for measuring and testing in both directions, disconnection module have two piece contacts normally closed.incorporating a disconnection facility, this gives all the features as above plus the added advantage of individual pair disconnection and four wire test access. For clicking onto Back-mounting frame.

1.Environment condition: ****0 degree Celsius ;Relative humidity <*5% (**0 degree Celsius);Atmospheric pressure: *****6KPa ;
2.The modules are compatible with KRONE LSA-PLUS modules. The design of contacts basing on the principle of airtight contacting makes a completely reliable connection between the contacts and wires
3.Pulling-out force: tin bronze and silver plating (****0 uinch), pulling-out force not less than *5N ;
4.Internal diameter of connection wire: 0.**0.6 mm
5.The performance of anti-burn: PBT (UL*4V*0)or anti-burn ABS (UL*4V*0),Combustibility achieved GB/T ***9.*****5 standard ;
6.Insulated resistance: under standard atmospheric pressure ,Insulated resistance no less than 1,**0M ohm between the two disjunct connections ;
7.Intermediate resistance between the reed terminators: no more than 7m ohm between intermediate reed under the standard examination condition ;
8.Intermediate resistance: no more than 3m ohm under standard examination condition ;
9.Dielectric strength: according to industry standard
*0.Specification:*0 pairs, 8 pairs, 5 pairs
*1.Type: disconnection types and connection types
*2.insertion Life: durability **0 cycles

Size (H x W x D): **2.5mm x *1.5mm x *0.5mm (*0 Pairs); **4mm x *1.5mm x *0.5mm (8Pairs);*5mm x *1.5mm x *0.5mm (5 Pairs);