Fujikura FSM-80S Fiber Fusion Splicer

Product Description

Newest & Fastest in their class
Single Fiber Arc Fusion Splicer

Fujikura *0S

The FSM**0S is core-to-core alignment single fiber splicer succeeding to FSM**0S. In addition to ruggedized concept, which *0S created, the *0S has a series of new features, such as "Automated wind-protector and tube-heater" for quicker splicing cycle as well as fewer operation steps, "innovative carrying-case design" for
quicker preparation, "powerful Li-ion battey" for longer operation, high resolution bigger LCD monitor, and "built-in operation manuals" in various languages. Market is from backbone network installation to opto-electronics components production for quality splice.

Applicable fibres  SM (ITU-T G.**2 & G.**7), MM (ITU-T G.**1),DS (ITU-T G.**3), 
NZDS (ITU-T G.**5),Others 
Fibre Count  Single  
Cladding diameter  *0 to **0μm  
Coating diameter  **0 to ***0μm  
Fibre cleaved length  5 to *6mm using Sheath Clamp A, B or 5 to*3mm using FH******0, FH******0  
Actual average splice loss  0.*2dB with SM, 0.*1dB with MM, 0.*4dB with DS, 0.*4dB with NZDS.  
Splice time  7sec:SM FAST mode, *2sec :SM AUTO mode, *5sec:AUTO mode 
Return loss  *0dB or greater  
Splicing modes  **0 splicer modes are available 
Splice loss estimate  Several types of core deformations as well as core axis offset are taken into account for accurate loss estimate.  
Attenuation splice function  Intentional high splice loss of 0.1dB to *5dB (0.*1dB step) can be made for an 
inline fixed attenuator  
Storage of splice result  The last ***0 results to be stored in the internal memory.  
Magnification  X / Y (**0X magnification), or both X and Y simultaneously (**0X magnification) 
Viewing method  By two CMOS cameras for intersecting fiber viewing and 4.*3 inches TFT colour LCD monitor  
Tension test 1.*6 to 2.*5N 
Operating condition  *****0m above sea level, ***5% RH and **0 to *0°C respectively.  
Tube heater  Built-in auto-start tube heater with *0 heating modes and up to *0 for reference  
Tube heat time  ****5sec. with FP**3 protection sleeve. Total memory of *0 heating modes are available 
Applicable protection 
sleeve length  *0mm, *0mm and a series of micro sleeves.  
No. of splice/heating 
with battery  **0 times of splicing and heat shrinking under with BTR**9  
Power supply  Auto voltage selection from **0 to **0Va.c. or *0 to *5Vd.c. with ADC**8. *4.8Vd.c. with BTR**9  
Terminals  USB2.0 ( Mini-B) for data and video signal transfer to PC.  
Wind protection  Up to *5m/s wind velocity  
Dimensions  **6(W) x **9(D) x **0(H) mm
Including wind protector, monitor, and rubber protector
Excluding rubber foot 
Weight  2.5 kg, with ADC**8 AC adaptor
2.7 kg, with BTR**9 battery 
Electrode life ***0 arc-discharges 
 


Standard Package
Item Description Model No. Qty 
1 Fusion Splicer *0S
with CLAMP-S*0A 1 pc 
2 AC adaptor/battery charger ADC**8 1 pc 
3 AC power cord ACC-XX 1 pc 
4 Spare Electrodes ELCT***0A 1 pair 
5 Cleaver CT**0A 1 pc 
6 Battery Pack BTR**9 1 pc 
7 USB cable  USB**1 1 pc 
8 Quick reference guide M**0S/*9S-E 1 pc 
9 Warning and cautions W***-E 1 pc 
*0 Instruction Manual M**0 1 pc 
*1 Alcohol Pot AP**1 1 pc 
*2 Battery charge cord DCC**8 1 pc 
*3 Carrying Case CC**0 1 pc 
*4 Screw Driver