The Standard Type of High-Speed Patent-Automatic Vacuum-Thermoform Pac

Product Description

The electric stove is manufactured by the stainless steel. It can avoid the ferric oxide produced from the similar type manufactured by the sheet iron under the high temperature fall on the the sheet material to destroy the product. The heat-preservation material in sets causes the thermal disappearing to fall the threshold, the energy conservation is remarkable. The vibration drawing of patterns can adjust willfully in *9, the formation product that the drawing of patterns above 2 won't be distort, or crack. Tt is the best choice to the products that Easy crisp and difficult drawing of patterns. The product can produce sheet material that thickness is frong 0.*5mm to 1.5mm when Using the Japanese frequency conversion technology electrically controlled to pull the piece. Its horsepower is very strength, it also pulls the piece length accurately (precisely to ±1mm), and the operation is simple (directly pulling piece length). Two-row chain driving can keep steady even in a high-speed.It has a width-adjust set which can limit decrease the width of the piece as low as possible, therefore It is able to use film furthest ,and reduce the waste material. There is two times� vacuum that make the high-difficulty product formed easily,reduced the rate of waster,developed the quantity of products. It has the product quantity hypothesis installment and the full board alarm device, that is suitable for volume production or statistics of each film production. It uses the non-pole cylinder to actuate the knives incise to-and-fro, the slice is ease and not vibrant. Electrically in-phase proofread install mould.