ALIGN T-REX 450PRO DFC JR 2.4G Combo Helicopters KX015087-XG6

Product Description

Model: KX******-XG6

Combo Included:

- T-REX **0 PRO DFC Kit X 1 set
- 3GX Flybarless System X 1 set
- **5D 3G Carbon blades X 1set
- RCE-BL*5P *5A Brushless ESC X 1
- **0MX Brushless motor(***0KV) X 1
- DS**5M (Metal Gear)Digital servo X 3
- DS**0 Digital servo X 1
- JR XG6 Transmitter & RG**1B Receiver
- APLUS ***0 mAh *5C 3S1P
- Balance 3S Charger
- Assembly & Test Fly

Introduction : 
(3GX Programmable Flybarless System) :

- Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts.
- 3GX is currently the smallest and lightest flybarless system on the market. Two ports to directly connect Spektrum and JR satellite receivers, along with full support of Futaba's S-BUS system.
- Based on the 3G FL**0 manual setup process, the 3GX can be setup in a few minutes through a simple process. In addition, the 3GX can support all of the CCPM swashplate system currently on the market including *0, **0, **5, and **0 degrees swashplates.
- Graphical illustrated instruction on the computer setup software directs the user through a step by step setup process, allowing for quick setups without omitting any steps.
- Support Bluetooth connectivity. With the soon to be released Bluetooth connectivity kit, 3GX can be programmed wirelessly from a PC. Eventually there will also be smartphone apps allowing live adjustments to 3GX without powering down.
- With 3GX's built in Align RCE-G**0 governor function, no external governor is needed to reduce electronic wire clutters.
- Custom parameters have been opened up in 3GX to allow pilots to fine tune numerous settings for swashplate and rudder. Settings export feature allows custom settings to be shared amongst friends.
- 3GX utilizes brand new gyroscope sensors of the highest specifications when compared to other flybarless systems currently on the market, allowing it to be used under harsh conditions. Dual axis plus rudder sensor dramatically improves swashplate and rudder correction precision compared to last generation 3G. This is clearly noticeable in stable hover as well as highly aerobatic routines.
- Suitable for helicopter of all class from **0 to **0, glow engine or electric powered. The superior vibration resistant characteristic is evident even when mounted with harder double sided mounting tape.
- 3GX utilizes *6 bit processor which is 4 times faster than previous generation, along with a completely re-written firmware. The result is a dramatic stability improvement from previous generation, with stability that rivals a flybarred helicopter, yet posses explosive agility.
- With built in pirouette compensation function, 3GX is able to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flips type of maneuvers are easily accomplished with precision.
- 3GX's rudder allows consistent rudder feel even under high speed conditions. This excellent control feel will allow pilot of all skill levels to experience the perfect integration between 3GX and helicopter.
- Support with APS gyro system and bring up more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize, hold position as well as altitude, and even autonomous way point flights as well as return home.

Specifications :
 (3GX Programmable Flybarless System) :

- Operating Temperature:**0~*0 degree
- X and Y axis Operating Angle Range:***0~***0 degree
- Z axis Operating Angle Range:***0~***0 degree
- Size:*6.5x*5.2x*5.6 mm Size
- Weight*1g Weight
- Supports Wide/Narrow Bandwidth Digital and brushless servos
- Spektrum and JR Satellite antennas support (Replaces original factory receiver)
- Futaba S.BUS system support
- Built in governor function
- Maximum working voltage:8.5V
- Compatible with ***4/***8 resolution Spektrum receivers
- Supports *0/**0/**5/**0 CCPM swashplates
- Field setup without the use of a PC
- Compatible with 2 to 5 blades rotor heads
- Support up to 6 servos
- Automatic servo type recognization

T-REX **0PRO DFC

- Length: **0mm
- Height: **4mm
- Main Rotor Diameter: **0mm
- Tail Rotor Diameter: **8mm
- Motor Drive Gear: *2T
- Main Drive Gear: **1T
- Autorotation Tail Drive Gear: **6T
- Tail Drive Gear: *5T
- Drive Gear Ratio: 1:*0.*8:4.*4
- Weight(w/o power system): **3g
- Flying Weight: Approx. **8g

Features:

- Equipped with DFC flybarless head assembly, with extremely low CG design to minimize wind resistance, providing more direct and precise flight control response and higher top speed.
- New removable main shaft block and servo mounting block to simplify main shaft and servo maintenance.
- Integrated battery and ESC mounting platform, with adjusted battery position to achieve the most optimal CG position of the helicopter.
- Vertical rudder servo mount design for closer CG, increasing the sportiness of 3D flights.
- New improved frame side plates with dedicated 3GX mounting location, to simplify wire management and overall aesthetics.? New style gyro mounting platform with added length.
- Highly rigid and lightweight carbon side plates.
- New style dual point supported tail control assembly for slop free tail, improving on rudder resolution and control precision.
- Unique anti-centripetal force weight tail blade grips to improve rudder locking effect.
- Equipped with Align's brand new MX series high efficiency brushless motor.
- Highly efficient torque tube tail drive design, dramatically reduce power loss found on belt driven system.
- Streamlined design canopy.


Users must have a certain concept of security to operate the R/C helicopters.
Be sure to read and comply with related safety notes of instruction manual before flying.