dust collector filter bag /bag dust collector

Product Description

single bag dust collector 

This series dust collector has many advantages, like, strong ability and high efficiency of dust removing, low emission concentration, less air leakage rate, low energy and steel consumption, small occupation area, reliable operation, and good economic benefit, etc. And it is mainly used for purifying the dusty gas and recycling materials, widely applied in metallurgy, construction materials, cement, machinery, chemical, electricity, light industries

Product Description of Pulse Bag Dust Collector

Bag type dust makes up of frame, ash bucket, in-the-box, on-the-box, bag, frame, jet cleaning devices and PLC components such as control procedures. In -the -box is the sub-room structure, while working the gas spread out by the dust collecting duct in all ash bucket. Coarse particles directly fall into the ash bucket bottom for wind speed reducing and the ash bucket spoiler role in the collision, fine dust rose with the bag at all between the fine dust was blocked leaving the outer surface of the bag, cleaning gas clearance role with negative pressure ventilation through the bag into the mains from the body into the atmosphere, reaching the purpose of purification.

Working Principle of Pulse Bag Dust Collector:
1. The dust-laden air enters the bag filter.
2. The dust /powder separates inside the bag filter chamber.
3. The air is uniformly distributed avoiding channelling while the powder is separated.
4. Initially a coat of material forms on the bags. Subsequently, the coat acts as the filtering medium.
5. The dust is accumulated on filter elements while the air passes through the filter bags from outside to inside.
6. The accumulated powder is dislodged from the bags by reverse pulsejet air intermittently.
7. The dislodged powder falls on bottom cone and is discharged through powder discharge valves.
8. The dust free air is sucked by induced draft fan and is exhausted to atmosphere.

The Main Technical Parameters of  dust collector:  

About us

Before Sale
Be a good consultant and assistant of our customer, to ensure our customer's investment will be rewarded with great profit.

1. Select the right model of equipment for customer.
2. To meet our customer's special needs, we can design and develop customized products.
3. Provide training for customer's technician.
4. We will send engineer to observe customer's working field to come up with an optimized solution.

During Sale
Respect every customer and provide them convenience and reliability. We are devoted to help customer gain more.
1. Inspect before accept the products sent by us.
2. Assist our customer to make a construction plan.

After Sale
1. The installation and testing of equipment.
2. Train the workers at present.
3. When the installation is finished, there will be one or two service engineer staying to ensure customer's production run well.

Welcome to our company!

If you have any requirement or question about raymond, please contact us at any time!