WS-C2960-24PC-L Switch 24 10/100 PoE + 2 T/SFP LAN Base Image Catalyst 2960 Series Switches

Product Description

WS-C******4PC-L Switch *4 *0/**0 PoE + 2 T/SFP LAN Base Image Catalyst ***0 Series Switches
*0%**8% off WS-C******4PC-L price, buy new & refurbished C******4PC PoE switch: Cisco Catalyst ***0 *4 *0/**0 PoE + 2 T/SFP LAN Base Image

1.**0% new SEALED NIB
2.1 year warranty
3. Save up *0%**0% off the GPL
4. Fully tested and Guaranteed

WS-C******4PC-L Overview
Layer 2 access switch
Software: LAN Base
Total *4 PoE Ethernet *0/**0 ports
2 GE dual purpose uplink
PoE switch, total available PoE power: **0W
Support maximum *4 ports up to *5.4W
Support redundant power supply (RPS)
Support ACL, Auto QoS, DHCP Snooping, Link STate Tracking, and IPv6 Host
Not support FlexStack
Not support PoE+
If optical ports to be used, additional GE SFP module will be required
Forwarding bandwidth: *6Gbps
Switching bandwidth: *2Gbps
The Cisco Catalyst ***0 Series Switches are the leading Layer 2 edge, providing improved ease of use, highly secure business operations, improved sustainability, and a borderless network experience. ***0 Series are fixed-configuration access switches designed for enterprise, midmarket, and branch office networks to provide lower total cost of ownership.
Catalyst ******4PC-L Switch Front Panel and Rear Panel

WS-C******4PC-L Specification and Datasheet
Model
Brand Cisco
Series Catalyst ***0
Product ID: WS-C******4PC-L
WS-C******4PC-L Configurations
Ethernet ports *4 Ethernet *0/**0 PoE ports
Uplink Interfaces 2 dual-purpose ports (*0/**0/***0 or SFP)
Cisco IOS Software Feature Set LAN Base
Available PoE Power **0W
Maximum Number of PoE+ (IEEE **2.3at) Ports N/A
Maximum Number of PoE (IEEE **2.3af) Ports *4 ports up to *5.4W
Performance and Scalability
Forwarding bandwidth *6 Gbps
Switching bandwidth *2Gbps
Flash memory *2 MB
Memory DRAM *4 MB
Max VLANs **5
VLAN Ids ***0
Maximum transmission unit (MTU) Up to ***0 bytes
Forwarding Performance
Forwarding Rate 6.5 mpps, **-Byte Packet Cisco Catalyst ***0
Resource
Unicast MAC addresses Default:***0; QoS:***0; Dual:***0
IPv4 IGMP groups Default:**5; QoS:**5; Dual:**5
IPv4 MAC QoS access control entries (ACEs) Default:**8; QoS:**4; Dual:0
IPv4 MAC security ACEs Default:**4; QoS:**8; Dual:**6
Dimensions (H x W x D)
Inches 1.*3 x *7.7 x *3
Centimeters 4.4 x *5 x *3.2
Weight
Pounds *2
Kilograms 5.4
Environmental Ranges
Operating temperature up to ***0 ft (***0 m)    Fahrenheit: *3º to **3ºF; Centigrade: *5º to *5ºC
Operating temperature up to *0,**0 ft (***0 m)    Fahrenheit: *3º to **4ºF; Centigrade: *5º to *0ºC
Short-term exception at sea level    Fahrenheit: *3º to *1ºF; Centigrade: *5º to *5ºC
Short-term exception up to ***0 feet (***0 m)     Fahrenheit: *3º to **2ºF; Centigrade: *5º to *0ºC
Short-term exception up to *0,**0 feet (***0 m)     Fahrenheit: *3º to **3ºF; Centigrade: *5º to *5ºC
Short-term exception up to *3,**0 feet (***0 m) Fahrenheit: *3º to **4ºF; Centigrade: *5º to *0ºC
Storage temperature up to *5,**0 feet (***3 m) Fahrenheit: *3º to **8ºF; Centigrade: **5º to *0ºC
Operating altitude Feet: Up to *0,**0; Meters: Up to 3,**0
Storage altitude Feet: Up to *3,**0; Meters: Up to 4,**0
Operating relative humidity *0% to *5% noncondensing
Storage relative humidity *0% to *5% noncondensing
Predicted Reliability
MTBF in hours **1,**1
Connectors and Interfaces
Ethernet Interfaces *0BASE-T ports: RJ**5 connectors, *-pair Category 3, 4, or 5 UTP cabling
**0BASE-TX ports: RJ**5 connectors, *-pair Category 5 UTP cabling
***0BASE-T ports: RJ**5 connectors, *-pair Category 5 UTP cabling
***0BASE-T SFP-based ports: RJ**5 connectors, *-pair Category 5 UTP cabling
***0BASE-SX -LX/LH, -ZX, -BX, -T, -FX, and CWDM SFP-based ports: LC fiber connectors (single/multimodefiber)
**0BASE-LX, -BX, -FX SFP-based ports: LC fiber connectors (single/multimodefiber)
Power Customers can provide power to a switch by using the internal power supply. Theconnector is located at the back of the switch. These switches do not have a redundant-power-supply port
The internal power supply is an auto-ranging unit
The internal power supply supports voltages between **0 and **0 VAC
Use the supplied AC power cord to connect the AC power connector to an AC power outlet
Cisco RPS connector:
The Cisco RPS connector offers connection for an optional Cisco RPS ***0 that uses AC and supplies DC output to the switch
The connector offers a ***0W redundant power system that supports up to 6 external network devices and provides power to2 failed devices at a time
The connector automatically senses when the internal power supply of a connected device fails and provides power to the failed device, preventing loss of network traffic
Only the Cisco RPS ***0 (model PWR-RPS***0) should be attached to the redundant-power-system receptacle
SFP Interfaces GLC-SX-MMD GLC-LH-SMD
GLC-T (***0BASE-T) GLC-SX-MM
GLC-LH-SM GLC-ZX-SM
GLC-ZX-SMD GLC-BX-D
GLC-BX-U CWDM SFP
Voltage and Power Ratings
AC/DC voltage **0 to **0 VAC
AC/DC Input current 8.0 to 4.0 A
Frequency *0 to *0Hz
Power Rating (kVA) 0.*7
DC Input Voltages (RPS Input) *2 V at *1.*5 A; **8 V at 7.8 A
Management and Standards Support
Management BRIDGE-MIB CISCO-CABLE-DIAG-MIB
CISCO-CDP-MIB CISCO-CLUSTER-MIB
CISCO-CONFIG-COPY-MIB
CISCO-CONFIG-MAN-MIB
CISCO-DHCP-SNOOPING-MIB
CISCO-ENTITY-VENDORTYPE-OID-MIB
CISCO-ENVMON-MIB CISCO-ERR-DISABLE-MIB
CISCO-FLASH-MIB CISCO-FTP-CLIENT-MIB
CISCO-IGMP-FILTER-MIB CISCO-IMAGE-MIB
CISCO-IP-STAT-MIB CISCO-LAG-MIB
CISCO-MAC-NOTIFICATION-MIB
CISCO-MEMORY-POOL-MIB
CISCO-PAGP-MIB CISCO-PING-MIB
CISCO-POE-EXTENSIONS-MIB
CISCO-PORT-QOS-MIB
CISCO-PORT-SECURITY-MIB
CISCO-PORT-STORM-CONTROL-MIB
CISCO-PRODUCTS-MIB
CISCO-PROCESS-MIB
CISCO-RTTMON-MIB CISCO-SMI-MIB
CISCO-STP-EXTENSIONS-MIB
CISCO-SYSLOG-MIB CISCO-TC-MIB
CICSO-TCP-MIB CISCO-UDLDP-MIB
CISCO-VLAN-IFTABLE RELATIONSHIP-MIB
CISCO-VLAN-MEMBERSHIP-MIB
CISCO-VTP-MIB ENTITY-MIB
ETHERLIKE-MIB IEEE****-PAE-MIB
IEEE****-LAG-MIB IF-MIB
INET-ADDRESS-MIB
OLD-CISCO-CHASSIS-MIB
OLD-CISCO-FLASH-MIB
OLD-CISCO-INTERFACES-MIB
OLD-CISCO-IP-MIB OLD-CISCO-SYS-MIB
OLD-CISCO-TCP-MIB OLD-CISCO-TS-MIB
RFC****-MIB RMON-MIB
RMON*-MIB SNMP-FRAMEWORK-MIB
SNMP-MPD-MIB SNMP-NOTIFICATION-MIB
SNMP-TARGET-MIB SNMPv*-MIB
TCP-MIB UDP-MIB
ePM MIB
Standards IEEE **2.1D Spanning Tree Protocol
IEEE **2.1p CoS Prioritization
IEEE **2.1Q VLAN
IEEE **2.1s
IEEE **2.1w
IEEE **2.1X
IEEE **2.1ab (LLDP)
IEEE **2.3ad
IEEE **2.3af
IEEE **2.3ah (**0BASE-X single/multimode fiber only)
IEEE **2.3x full duplex on *0BASE-T, **0BASE-TX, and ***0BASE-T ports
IEEE **2.3 *0BASE-T specification
IEEE **2.3u **0BASE-TX specification
IEEE **2.3ab ***0BASE-T specification
IEEE **2.3z ***0BASE-X specification
**0BASE-BX (SFP)
**0BASE-FX (SFP)
**0BASE-LX (SFP)
***0BASE-BX (SFP)
***0BASE-SX (SFP)
***0BASE-LX/LH (SFP)
***0BASE-ZX (SFP)
***0BASE-CWDM SFP ***0 nm
***0BASE-CWDM SFP ***0 nm
***0BASE-CWDM SFP ***0 nm
***0BASE-CWDM SFP ***0 nm
***0BASE-CWDM SFP ***0 nm
***0BASE-CWDM SFP ***0 nm
***0BASE-CWDM SFP ***0 nm
***0BASE-CWDM SFP ***0 nm
*0GBASE-LR (SFP+)
*0GBASE-SR (SFP+)
*0GBASE-LRM (SFP+)
*0GBASE-CX1 (SFP+)
RMON I and II standards
SNMP v1, v2c, and v3
RFC compliance RFC **8 - UDP
RFC **3 - TFTP
RFC **1 - IP
RFC **2 - ICMP
RFC **3 - TCP
RFC **6 - ARP
RFC **4 - Telnet
RFC **1 - Bootstrap Protocol (BOOTP)
RFC **9 - FTP
RFC ***2 - IP Multicast and IGMP
RFC ***7 - SNMP v1
RFC ***6 - IP Addresses
RFC ***6 - Internet Control Message Protocol (ICMP) Router Discovery
RFC ***5 - NTP
RFC ***2 - TACACS+
RFC ***3 - Bridge MIB
RFC ***2 - BOOTP extensions
RFC ***3 - Ethernet Interface MIB
RFC ***7 - RMON
RFC ***1 - SNMP v2C
RFC ********7 - SNMP v2
RFC ***1 - Maximum Transmission Unit (MTU) Path Discovery IPv6
RFC ***1 - DHCP
RFC ***8 - RADIUS
RFC ***3 - IF MIB v3
RFC ***3 - IPv6 Aggregatable Addrs
RFC ***0 - IPv6
RFC ***1 - IPv6 Neighbor Discovery
RFC ***2 - IPv6 Autoconfiguration
RFC ***3 - ICMP IPv6
RFC ***4 - Differentiated Services (DiffServ) Precedence
RFC ***7 - Assured Forwarding
RFC ***8 - Expedited Forwarding
RFC ***1 - SNMP Management
RFC ***6 - DHCP Relay Agent Information Option
RFC ***6 - IGMP v3
RFC ***0 - **2.1X RADIUS
Related Cisco ***0 series network switches
WS-C******4TC-L WS-C***0S**8LPD-L
WS-C******8TC-L   WS-C***0S**8FPD-L
WS-C******4PC-L WS-C***0X**4PS-L
WS-C******4PC-S WS-C***0X**8LPS-L
WS-C******4TT-L WS-C***0X**4TS-L
WS-C******8TT-L WS-C***0X**8TS-L
WS-C***0S**4TS-L WS-C***0X**8FPD-L 

Delivery
We ship Cisco networking products to worldwide. Normally cargo will be shipped within 2 business days after payment arrived. Tracking Number will be offered once delivery done.

Delivery Options Estimated Delivery Time
DHL **4 business days
Fedex **4 business days
HongKong EMS ***0 business days
HongKong Air Parcel ****0 business days
By sea ****0 business days