solar controller 20A&10A

Description

Specificationssolar controller CE certification time and light control function for streetlight system special anti-reverse protection solar controller TECHNICAL INFORMATION Note: All printed Voltages are only for *2V system. Double voltages for *4 Volt systems. Terminals For wire sizes to 4mm² Weights **0g Dimension **0**0.5mm Self-consumption 6mA maximum Temperature *5 to *5 centigrade. Enclosure IP*2 Warranty *2 Months Compliance CE Rated charging current *0A *5A *0A Rated load current *0A *5A *0A Work voltage:*2V; *2V/*4V AUTO Over load, short circuit protection. Over load protection action: 1.*5times rated load current in **-sec, 1.5 times rated load current in *-sec; Short circuit protection action: >=3times rated load current No load current: <=6mA Charging circuit voltage drop:<=0.*6V Load circuit voltage drop:<=0.*5V Over voltage protection: *7V, x2/*4V Work temperature:Industry stage: **5°Cto **5°C Boost charge voltage:*4.6V; x2/*4V(keep **-min) (Only applied when overdischarge appears) Direct charge voltage:*4.4V; x2/*4V(keep **-min) Float charge voltage: *3.6V; x2/*4V(keep working until drop to the point of charge return voltage action) Charge return voltage:*3.2V; x2/*4V Temperature compensation: *5mv/2V(Boost charge, Direct charge, Float charge, charge return voltage) Lower voltage indicate:*2.0V; x2/*4V Over discharge voltage:*1.1V no load-real-time modified voltage by the discharge rate; X2/*4V Over discharge return voltage; *2.6V; 2/*4V Control mode: PWM charge mode size of the installing hole : Size: **0**0.5(mm) Length between installing holes:**3.5X*0(mm)