Description
The technical performance:
DESIGN VERTICAL LOAD (Unit:
KN):
1,**0;2,**0;3,**0;3,**0;4,**0;4,**0;5,**0;5,**0;6,**0;7,**0;8,**0;9,**0;*0,**0;*2,**0;*5,**0;*7,**0;*0,**0;
*2,**0;*5,**0;*7,***0;*0,**0;*2,**0;*5,**0;*7,**0;*0,**0;*5,**0
DESIGN
HORIZONTAL LOAD:
For free direction of fixed
bearing,
For longitude movement bearing,
For transverse movement bearing,
The design horizontal load of non-movement direction
is:
*5% of design vertical load: for areas where earthquake dynamic
peak acceleration: Ag=0.1g
*0% of design vertical load: for areas where earthquake dynamic
peak acceleration: 0.1g，less than the Ag of 0.*5g
*0% of design vertical load: for areas where earthquake dynamic
peak acceleration: 0.*5g, less than the Ag of
0.2g
For free movement bearing
For longitude movement bearing
For transverse movement bearing
The design horizontal load of movement direction is 5% of the
design vertical load.
The design rotation
angle is 0.*2rad
The
design displacement of a bearing: Design longitude
direction displacement for free movement bearing (DX) and
transverse movement bearing (ZX):
In the part of simple beam:
***0 to ***0KN plus or minus
*0mm
***0 to ***0KN plus or minus
*0mm
***0 to ***0KN plus or minus *0mm
In the part of continuous beam: ***0 to ****0KN plus or minus
**0mm
The design
friction coefficient of bearing: Normal temperature:
0.*3 Low temperature: 0.*5
The design
height adjustment range of bearing:Adjust the height
with polyurethane in bottom or add steel plate on to top of the
bearing. The adjustment range,no less than *0mm
Temperature
range:
Normal temperature type:
chloroprene rubber and natural rubber: **5 to **0centigrade;
Low temperature type:
EPDM and natural rubber:**0 to **0centigrade
The design slope
range:The slope range is 0 to *0%
