HDMI SPLITTER

Description

mini 1x2 HDMI Splitter use a single HDMI source,accessing to multiple HDMI sinks.

The Full 3D 1x2 HDMI Splitter use a single HDMI source,accessing to multiple HDMI sinks. The Splitter allows one HDMI devices to be split easily to four HDMI compatible monitors or projectors. The Splitter can also be placed at the end of a long HDMI cable to regenerate the HDMI signal.

Our devices offer solutions for noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.

FEATURES
1 One HDMI input signal split to four HDMI sink devices
2 Support  Full HD, Full 3D
3 Support 4Kx2K resolution
4 Support CEC
5 Support deep color *0bit, *6bit, *8bit
6 Support Blue-Ray *4/*0/*0fs/HD-DVD/xvYCC
7 Digital audio format, as DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3
  /DSD/HD(HBR)
8 Support signal retiming
9 Support input up to *5metres AWG*6 HDMI standard cable length,
  output up to *5metres AWG*6 cable length
*0 No loss of quality
*1 Installs in minutes
*2 Need DC5V/3A power supply

Operating and Connecting 

1. Connect one cable from HDMI source devices into HDMI Splitter input.
2. Connect one cable from each display (monitor or projector) into the HDMI Splitter outputs.
3. Connect 5V power supply to the Mini HDMI 1x2 Splitter.

 Notes:
Pls use the machine as the instruction listed to keep the long use lifetime of the machine.
   1. The machine should be placed at the spot far from the Damp, High-Temperature, Dusty, Erosive, and oxidative environment.
   2. All parts will be free from the strong shake, hit, fall.
   3. Touching the power adaptor with the wet hands is prohibited.
   4. Pls hold the power adaptor head and do not pull the power cord when cut off from the socket.
   5. Pls turn the power off when the machine is not used for long time.
   6. Pls do not open the cover and do not touch the inside parts.
   7. Pls use the original factory power adaptor.

Before power on, pls check the connection line carefully. And make sure that all interfaces are normally connected. The common trouble shooting way shows below: