Sell Freight Elevator

Description

This freight elevator features safety,advanced technology, different sizes,high performance, good structure, wide applications,etc.It is the wise choice for vertical transport of goods.

1. Automatic operation:Automatically open the door;automatic time-lapse closing;manual closing in advance.
2. Operator operation:The operator can choose the floor and the freight elevator will open the door automatically when reaching the station;Automatic registration in the car and automatic response outside the car; manual closing.
3. Closing protection:If anyone enters into the elevator while the door is closing,it will stop closing to open again.
4. Overload protection:When the elevator is overloaded,the alarm will ring and the light will on.The elevator will not close the door and not operate.
5. Full-load directional operation:when the elevator reaches the largest load,it will only respond to the instructions inside.
6. Energy-saving function:If no one uses the elevator during the setting time,the illumination and air blower in the car will turn off automatically and turn on with the instructions.
7. Nearby standing:During the operation,if the elevator breaks down,it will stop on the nearby station and open the door automatically.
8. Arriving station alarm:When the elevator is going to reach the destination floor,the alarm will ring to notify the passengers.
9. Emergency illumination in the car:When the power of the illumination is cut off,the emergency illumination will be turned on.
*0. Automatic base station return:With no calling, the elevator will return to the appointed base station.
*1. Automatic floor return when energized:The elevator will return to the floor when energized.
*2. Overspeed protection:
*3. Anti-disturbance:When the elevator load is below the setting and the instruction inside the car is more than three, then all the instructions will be cancelled.
*4. VIP service:During VIP service, the elevator will abide the instruction inside the car in advance to ensure the rapid arriving of the passengers.
*5. Forced closing:When the opening time is beyond the setting,the system will ignore the closing protection function temporarily and close forcedly.
*6. Inner communication:When the elevator breaks down,the people in the car can communicate with the staff in the generator room or the detecting room.
*7. Breakdown testing:When the elevator is break down,the system will analyze the reason automatically for the maintenance staff.
*8. Repeated closing:When the door is not closed in the setting time with the closing instruction,the door will open and close again.
*9. Standing function:When the elevator is not in use,standing floor can be chosen.
*0. Automatic turning on and off function:The turning on and off can be set without any inspection.
*1. Operation cancel:When the passenger chooses the wrong floor,he can cancel it and choose again.
*2. Non-stopping floor setting:The passenger can set the non-stopping floor according to his need.
*3. Character setting:The character displayed can be set according to the need.
*4. Calling button diagnosing function:The system will ignore the floor-choosing instruction when the calling button of this floor is closed for a long time.
*5. Hibernate function:When the elevator is not in use in the setting time,the monitor will hibernate to increase the lifespan.
*6. Intelligent freight elevator manufactureroperation:When the elevator is in use,the elevator will choose the best operation mode according to the passenger number and time.