Description
Products:
�
Overview
�
SINOV-TDM**0P
is a new generation analog card with interchangeable FXS_**0 �and
FXO_**0 modules. It can eliminate the requirement for separate
channel banks or access gateways.
The
SINOV-TDM**0P contains 4 module banks. Each bank supports one
analog interface. The module banks may be filled with up to FXO_**0
or FXS_**0 modules enabling the creation of any combination of
ports. Scaling of an analog card solution is accomplished by simply
adding additional cards.
SINOV-TDM**0P_B
works with Asterisk�, Elastix�, FreeSWITCH�, PBX in a Flash,
trixbox�, Yate� and IPPBX/IVR projects as well as other Open Source
and proprietary PBX, Switch, IVR, and VoIP gateway
applications.
�
Main Features:
�
1�High
security: It adopt tertiary thunder preventing technology, can
prevent the thunder and lightning from striking
effectively.
2� No
additional power connector or supplier is required for the
operation of FXS modules, reduced the line wave of the power, has
improved the voice quality.
3�World Wide
Usable: Configurable line interface to meet global telephone line
interface requirements.
4�The PCI plug is based on PCI Express 1X. User could choose any of
combinations of FXO_**0 or FXS_**0 modules according to customer�s
requirements.
5�*2 bit bus
master DMA data exchanges across PCI Express interface at
**0Mbytes/sec for minimum host processor
intervention.
6 The high
stability firmware is exported / imported with DMA data exchange,
so it accelerated and reduced CPU load greatly. Under the
environment of the same hardware, CPU rate of utilization is equal
to CPU rate of utilization of using 4 port analog
card.
7�It supports
all the functions of Asterisk PBX systems
needed.
8�Exchangeable with Digium modules: It is mixable with X**0M/S**0M
of Digium
9
Humanization is designed: The module socket that should be nipped
is all adopted and stuck to one slice of sockets, can prevent
stabing users finger effectively.
New function:
1���Easy to install , using way is same as DIGIUM Asterisk
card
2�� If use Trixbox/Elastix/Freeiris2 IPPBX software, it can
automatic recognition our cards, don�t need to install any
drivers.
3�� For 2U classis high
�
Product Spotlight
�
SinoV-TDM**0P_B
is a new analog card. It can be used for connecting analog
telephones and analog POTS lines through a PC. It delivers the
superior voice quality on both FXO and FXS interfaces in all�4
ports.
�� Adjustable
Interrupt Routing Design
�� Interrupts
Frequency Adjustment
�� Up to�4
Simultaneous PSTN Calls (Per PCI Slot)
�� Compatible
with All Commercially Available Motherboards
�� *-Month
�No Question Asked� Return Policy
�� Lifetime
Warranty
�
Target Applications
�
�� Channel
Bank Replacement / Alternative
�� Small
Office Home Office (SOHO) applications
�� Small and
Medium Business (SMB) applications
�� Gateway
Termination to analog telephones/lines
�
Services and Features
�
�� Caller ID
and Call Waiting Caller ID
�� ADSI
Telephones
�� Loopstart
Signaling Support
�
Technical Specifications
�
�� Up to 4
ports through a combination of FXS_**0 and FXO_**0
modules
��
Full-length analog card
�� Up to�1
quad FXS or FXO modules
�� RJ*5
connector
�� **-bit
*3MHz PCI and fully PCI 2.3 compliant, compatible with all
commercially available motherboards, and proper sharing of PCI
interrupts
�� *2 bit bus
master DMA data exchanges across PCI interface at **2
Mbytes/sec
�� Autosense
compatibility with 5 V and 3.3 V PCI busses
compatible
�� Power:
8.*1W Minimum, *8.*4W Maximum at 3.3 V or 5
V.
�� Operation
temperature: 0�C to *0 �C
�� Storage
temperature: **0�C to **5�C
�
Operating Systems
�
�� Linux (all
versions, releases and distributions from 1.0
up)
�
Minimum Hardware Requirement
�
�� ***-Mhz
Pentium III
�� **8MB
RAM
�� Available
PCI Slot
Size and
Weight
�
Size(L*W*H):� **4**0**2MM
� Wight:
**2g
